M400 elektrinė pavara šildymui

M400 elektrinė pavara šildymui

Prekės kodas: 8800230030 Kategorija:

TACPaskirtis: šildymui

Kaina su PVM: 312,18 €

258,00 + PVM

Čia pateikiamos mažmeninės prekių kainos. Siųskite mums užklausą ir gausite asmeninį pasiūlymą.

Turime sandėlyje!

Prekę pristatysime per 1 d.d. (užsakius iki 12:00).

Aprašymas

M400 elektrinė pavara šildymui, kodas 8800230030, – tai daugiafunkcinė elektro-mechaninė pavara dvieigio ar trieigio vožtuvo valdymui, skirta šildymo arba vėdinimo sistemoms.

Rutulinė sklendinė pavara

M400 yra daugiafunkcinė elektromechaninė dviejų ar trijų eigų pavara, skirta vožtuvo valdymui:

  • šildymo sistemai
  • vėdinimo sistemai

M 400 pavara visų pirma skirta taikyti sistemose, kur reikalavimai pavaros greičiui ir traukos jėgai yra santykinai maži (M400 is primarily designed for applications where the demands on actuator speed and thrust are relatively small).

FUNCTION

The actuator
The actuator utilises a brushless DC motor to accurately position the main spindle via a gearbox in accordance to the control signal received from the controller.
Upon initial power up and activation of calibration switch 9. The actuator undertakes a full stroke cycle to learn the valve end stop positions and to calibrate the full running stroke time. End switch point adjustment is also calibrated during this process.

Control signal
The Forta M400 can either be controlled by an increase/decrease signal or by a selection of variable direct voltages.
If an increase/decrease signal is used, the actuator normally retracts inwards (Up) on an increase signal and Extends Outwards (Down) on a decrease signal, see Settings.

Manual operation
There is a manual operation handle on the actuator, see figure 2. When the handle is lowered, the power supply to the motor is automatically cut and the actuator can be operated manually by rotating the handle thus lowering or raising the actuator spindle. The actuator is factory supplied with the actuator in manual operation mode.

Position feedback
Forta actuators are equipped with a 2–10 V DC position feedback signal, where 2 V corresponds to the closed position and 10 V to the open position (depending of switch nr.1).

Papildoma informacija

Gamintojas

TAC

Susiję straipsniai

Susiję produktai

Title

Go to Top