SVW 6 3/4 apsauginis vožtuvas

SVW 6 3/4 apsauginis vožtuvas

Prekės kodas: 10004724 Kategorija:

Watts6 bar, DN20 (3/4″)
Maksimali temperatūra: 140 °C

Kaina su PVM: 16,46 €

13,60 + PVM

Čia pateikiamos mažmeninės prekių kainos. Siųskite mums užklausą ir gausite asmeninį pasiūlymą.

Turime sandėlyje!

Prekę pristatysime per 1 d.d. (užsakius iki 12:00).

Aprašymas

SVW 6 3/4 apsauginis vožtuvas, kodas 10004724.

Apsauginis membraninis vožtuvas

Jis skirtas apsaugoti iki 30 000 kcal/val. pajėgumo šildymo ir karšto vandentiekio sistemas bei katilus nuo maksimalaus leistino darbo slėgio viršijimo.
Vožtuvas apsaugotas presuotu dangteliu, kuris neleidžia pakeisti gamyklinių išleidimo slėgio nustatymų.

SVW apsauginis vožtuvas – tai ŠVOK sistemose naudojama armatūra, atitinkanti DIN EN 12828:2003 ir DIN 473. Maksimali darbo temperatūra +140°C.
Gamintojo numatytas vožtuvų išleidimo slėgis nuo 1,5 bar ir 10 bar. Apsauginis vožtuvas gali būti montuojamas bet kokia padėtimi, ir aukščiausiame katilo taške arba ant padavimo linijos.

Technnės ypatybės

  • Maks. darbinis slėgis: 6 bar
  • Korpuso medžiaga: žalvaris CW617N.
  • Plastmasinis dangtelis (mėlynas) rankiniam nuleidimui.
  • Spyruoklė: plieninė.
  • Prijungimo ir nuleidimo anga yra su vidiniu sriegiu.
  • Terpė: vanduo arba gliukolio tirpalas iki 50%.

Description

The MSL, MSV, SV series standard safety valves automatically discharge enough liquid so the safety pressure setting is not exceeded. It requires no energy except the pressure liquid, and protects the heat generator and the system.
The valves are designed and manufactured in compliance with Raccolta R – 2009 edition, applied technical specifications of Italian Ministerial Decree 1-12-1975.

SVW valves

Diaphragm safety relief valve for water heaters in accordance with DIN 4753. Normal type diaphragm safety valve. Brass CW617N body. Plastic manual discharge knob. Ni-Cr steel spring. Diaphragm and seals of rubber resistant to 140°C. Female connections with reinforced outlet. According to Directive PED 97/23/CE. TÜV approved. Compliant with European PED Directive 2014/68/UE ID no. Identification number CE1115.

Technical specifications

  • Nominal pressure: PN10
  • Overpressure: <10%
  • Blowdown: <15% (MSL, MSV) <20% (SV)
  • Operating temperature: -10°C÷110°C
  • PED category: IV

Materials

  • Body Brass CW617N
  • Diaphragm EPDM
  • Manual discharge knob polimeric
  • Setting spring Ni-Cr Steel
  • Cap and disc reinforced polimeric

Operation

The liquid contained in the system places pressure on the disc, which pushes against the spring until the pressure exceeds the declared setting.
The disc then slowly starts to open,allowing water flow to inflate the diaphragm.
The valve opens and discharges into the air, relieving the system from dangerous pressure for the generator and for the system parts.
The disc opens fully, before the liquid pressure increases by 10% over the set pressure (overpressure).
The valve closes before the pressure drops to 15% below the pressure setting (blowdown).
In the SV series valves, the outlet port has a wider diameter than the inlet port, increasing the discharge capacity of the valve.
The characteristics of the materials used prevent the valves from seizing up over the long-term.

Papildoma informacija

DN

20

Darbinis slėgis (bar)

6

Gamintojas

WATTS

Susiję straipsniai

Title

Go to Top